Configure Tvheadend

This section gives a high-level overview of the steps needed to get Tvheadend up and running. For more detailed information, please consult the rest of this guide - much of it is arranged in the same order as the tabs on the Tvheadend interface so you know where to look.

You can also consult the in-application help text, which mirrors this guide to a very great extent.

1. Ensure Tuners are Available for Use

Tvheadend web interface: Configuration -> DVB Inputs -> TV Adapters

On this tab, you’ll see a tree structure, with the Linux device list at the top level (e.g. /dev/dvb/adapter0)

Individual tuners are then the next level down (e.g. DiBcom 7000PC : DVB-T #0)

Click on each tuner that you want Tvheadend to use, and ensure “Enabled” is checked in the ‘Parameters’ list

If anything is obviously wrong at this point, you probably have a driver/firmware error which you’ll need to resolve before going any further.

2. Set up Relevant Network(s)

Tvheadend web interface: Configuration -> DVB Inputs -> Networks

Create a network of the appropriate type here. You can have multiple networks of the same type as necessary, e.g. to have two DVB-T networks defined, one with HD muxes, one without.

The creation process allows you to select from a series of pre-defined mux lists for common DVB sources. These are maintained outside of Tvheadend, and are downloaded from linuxtv - but they do go out of date as broadcasters move services around and national authorities change entire pieces of spectrum. As such, you should try the pre-defined values, but you may need to add muxes manually.

Critical Configuration Items

Critical configuration items at this stage: <........>

NOTE: TEXT REQUIRED

3. Associate the Network with the Respective Tuner(s)

Tvheadend web interface: Configuration -> DVB Inputs -> TV Adapters

Associate each of your tuners with the correct network through Parameters -> Basic Settings.

This can be as simple or as complex as necessary. You may simply have, for example, a single DVB-S2 network defined and then associate this with all DVB-S2 tuners. Or, you might have multiple networks defined - different satellites, different encoding. So, as further examples, you might define and then associate an HD DVB-T2 (e.g. H.264) network with HD tuners, while having a separate SD network associated with an independent SD (e.g. MPEG-2) tuner.

Critical Configuration Items

Critical configuration items at this stage: <........>

NOTE: TEXT REQUIRED

At this point, your tuners now know what networks to use: one network can appear on multiple tuners (many-to-one), and one tuner can have multiple networks.

4. If Necessary, Manually Add Muxes

Tvheadend web interface: Configuration -> DVB Inputs -> Muxes

Ideally, this is where you’ll see a list of the pre-populated muxes as created when you set up your initial network. However, should there be any issues, this is where you can manually add missing muxes. You only really need to worry about this if the pre-defined list didn’t work (e.g. because of out-of-date data as broadcasters re-arrange their services or because automatic detection hasn’t successfully found all the muxes over time.

If you do need to add something manually, you’ll need to search the Internet for details of the appropriate transmitter and settings: satellites tend not to change much and are universal over a large area, but terrestrial muxes are typically very localised and you’ll need to know which specific transmitter you’re listening to.

Good sources of transmitter/mux information include:

other major sources....?

NOTE: TEXT REQUIRED

You can also use dvbscan to force a scan and effectively ask your tuner what it can see.

Critical Configuration Items

Critical configuration items at this stage: <........>

NOTE: TEXT REQUIRED

5. Scan for Services

Tvheadend web interface: Configuration -> DVB Inputs -> Services

This is where the services will appear as your tuners tune to the muxes based on the network you told them to look on. Again, remember what’s happening: Tvheadend is telling your tuner hardware (via the drivers) to sequentially tune to each mux it knows about, and then see what ‘programmes’ it can see on that mux, each of which is identified by a series of unique identifiers that describe the audio stream(s), the video stream(s), the subtitle stream(s) and language(s), and so on.

(For the technically-minded, these unique identifiers - the elementary streams - are referred to as ‘packet identifiers’ or ‘PIDs’).

To force a scan …

NOTE: TEXT REQUIRED

6. Map Services to Channels

Once scanning for services is complete, you need to map the services to channels so your client can actually request them (i.e. so you can watch or record). You can do this in two places:

Tvheadend web interface: Configuration -> DVB Inputs -> Services

Press the “Map All” button. Note the resultant dialog box that allows you to exclude some services from the mapping: this is covered in more detail later in this guide.

Tvheadend web interface: Configuration -> Channel/EPG -> Channels

Press the “Map Services” button. Again, you can exclude services as you can for ‘Map All’, above.

Any explanation on how a channel can map to multiple services <......>

Anything about using bouquets

NOTE: TEXT REQUIRED

7. Watch TV

That’s it - you’re done. You should now have a working basic Tvheadend installation with channels mapped and ready for use!

As required, you may now wish to look into:

  • Setting up different EPGs (inc. localised character sets and timing offsets)
  • Setting up channel icons
  • Setting up recording profiles
  • Setting up streaming profiles (including transcoding)
  • Arranging your channels into groups (channel tags)
  • Setting up softcams for descrambling
  • Setting up access control rules for different client types/permission levels